|
|
A |
L |
U |
M |
I |
N |
U |
M |
|
|
| [Home]
[Adhesive
Film] [Dibond
]
[Edge Trim] [Form
Core] [Gatorboard] [Gatorplast] [Kapa Bloc] [Polystyrene (HIPS) ] [Sintra] |
| [Dibond
Data Sheet] [Polystyrene Fact Sheet] [Gatorboard Handling & Cutting] [Board Types] [Measurement conversions] |
|
ULTRA
Aluminum Panel, Aluminum face and back,
thermoplastic core
ULTRA ALUMINUM is a lightweight structural panel consisting of a rigid
polystyrene foam core faced on one side with anodized aluminum or
white painted aluminum and one side with litho grade high impact
polystyrene. The foam and facers are permanently bonded together. The
anodized aluminum panel can be used to create decorative letters and
logos at a fraction of the cost of solid metal letters. White Aluminum
panels are an excellent choice for exterior and interior signage.
ULTRA ALUMINUM panels are a strong, moisture resistant material. When
exposed to long periods of very moist conditions, there is little
change in either the face or the core. The aluminum faces do not
yellow, oxidize, crack or degrade when exposed to exterior conditions.
Ultra violet radiation degrades unprotected foam. Therefore, any
exposed foam should be protected with a good quality, pigmented water
base coating or other U.V. barrier.
ULTRA ALUMINUM panels have 0.016" anodized aluminum or 0.020" white
aluminum facers. Anodized facers available are brushed gold, polished
gold, brushed chrome and polished chrome. The facers have peel coat
release liners to protect against scratching.
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| [Home]
[Gatorboard]
[Form Core]
[Kapa Bloc]
[Sintra]
[Adhesive
Film]
[Edge Trim] [Order Form] |